SJ-20162405182123-002|2016-05-24 (R2.0)
5-1
Chapter 5.
Configure the VoIP
Table of Contents
..................................................................................................
Configure the Binding of VoIP port
.......................................................................................
5.1.
Configure the SIP Accounts
This procedure describes how to configure basic parameters of the VoIP service, including
Tel. number, authorization username and password.
Steps
1. Select
VoIP > Telephone Number
. The
SIP Account
page is displayed, as shown
Figure 5-1 Parameters of the SIP Accounts Page
2. The parameters of the SIP Account according to
automatically by the IMS system in a few minutes after the synchronization of the
VoIP service. For a description of the parameters, refer to
Table 5-1 Parameter Descriptions for the SIP Accounts
Parameter
Description
On/Off
Set radio button to
On
to enable the function of SIP accounts.
User Name
(Tel. Number)
Registered name of a SIP subscriber. Normally, it is the phone number of the
subscriber (starting with
+30
).
Password
Password for VoIP service authentication by the IMS system.
The password is completed automatically by the IMS system, but in case of a
problem contact with the phone number 13888 for the help desk (see Step 5
below).
Authorization
Username
Username for authentication by the IMS system (starting with
+30
).
It is the same phone number as in the field
“
User Name (Tel. Number)
”
.
