SJ-20162405182123-002|2016-05-24 (R2.0)
Configure the Internet
3-13
Parameter
Description
802.1p
Specify the 802.1p value to modify the service priority.
VLAN ID
Identifies a VLAN. Range: 1–4094. To ensure normal service
operation, the
VLAN ID
must be the same as that set by the
network service provider who will inform the user about the
VLAN ID.
Level 2 Protocol
The level 2 protocol includes: Unconcerned, IPv4, IPv6, ARP
and PPPoE.
Source IP
Source host IP address.
Destination IP
Destination host IP address.
DSCP
DSCP value.
Level 3 Protocol
The Level 3 Protocol includes: Unconcerned, TCP, UDP and
ICMP.
Source Port
Source port number of the matching packets.
Destination Port
Destination port number of the matching packets.
TCP ACK
Set radio button to
On
to enable the function of TCP ACK.
Packets Classification Result
802.1p Re-marking
802.1p identifier value.
DSCP Re-marking
DSCP identifier.
Traffic Policing Rule Index
Select traffic police rule index.
Traffic Class
Range: 1~1024.
Traffic Class
is used to bind one or several
classifications to a queue.
3. Click
Apply
button to apply the changes.
– End of Steps –
3.4.3.
Configure the QoS Congestion Management
This page provides the parameters of QoS
Congestion Management configuration
features.
Steps
1. On the main page of the Speedport Entry 2i, select
Internet > QoS >
Congestion Management
to go to the
Congestion Management
page, as shown
in
