SJ-20162405182123-002|2016-05-24 (R2.0)
Configure the Internet
3-15
2. Click
Apply
button to apply the changes.
– End of Steps –
3.4.4.
Configure the QoS Traffic Policing
This page provides the parameters of QoS traffic policing configuration features.
Steps
1. On the main page of the Speedport Entry 2i, select
Internet > QoS > Traffic Policing
to go to the
Traffic Policing
page, as shown in
Figure 3-9 Traffic Policing page
lists the QoS Traffic Policing parameters.
Table 3-5 Parameter Descriptions for the QoS Traffic Policing
Parameter
Description
On/Off
Set radio button to
On
to enable traffic policing.
Name
To create a QoS traffic policing, enter the name of the traffic
policing identifier.
Meter Type
The meter type includes:
l SimpleTokenBucket
l SimpleRateThreeColor
l TwoRateThreeColor
Committed Rate
Guaranteed rate.
Committed Burst Size
The value of "Committed Burst Size" is recommended as 1/8
of the "Committed Rate" value.
