SJ-20162405182123-002|2016-05-24 (R2.0)
Configure the Internet
3-21
Table 3-10 Parameter Descriptions for the URL Filter
Parameter
Description
Name
The name of the URL filter.
URL
The URL address.
10. Click
Apply
button to apply the changes.
IP Filter-IPv4
11. Click
to open the IPv4 filter page, as shown in
Figure 3-15 IPv4 Filter Page
lists the
IP
Filter parameters.
Table 3-11 Parameter Descriptions for the IPv4 Filter
Parameter
Description
On/Off
Set radio button to
On
to enable the function of IPv4 filter.
Name
Name of the IP filter item.
The name must be specified.
Mode
Specify to discard or permit the data packages.
Protocol
Select the protocol that needs to filter packets.
By default, it is
TCP
.
Source Port Range/Destination
Port Range
Source/Destination source Port.
Source IP Range/Destination IP
Range
Source/Destination IP address.
