Ossila T2005, Руководство пользователя

Страница: 25 / 27

LED Measurement System User Manual
Ossila.com 24 Ossila Limited © 2022
11.2 Error Messages and Warnings
Message Description
Current compliance reached The measured current is greater than the set current limit.
Error communicating with
system The software is unable to connect to the system.
No device holder detected The device holder is not connected to the system properly.
Sensor lid open The lid of the device is not properly closed.
Voltage increment cannot be
zero The voltage increment is set to 0 V.
Start and end voltage cannot
be equal The start and end voltages of are set to the same voltage.
No save directory or device
label entered The save directory and/or the device label fields are empty.
Settings profile not found The given settings profile does not exist or is open in other
software.
Error loading settings There is a problem with the settings profile preventing it
from being loaded.
Error deleting profile The given settings profile does not exist, the software does
not have the necessary permissions to delete it, or it is open
in other software.
No data to save There is no measurement data in memory to save to file.
Error saving data The software does not have the necessary permissions to
access the given file path, or the file is already open in other
software.
Error saving settings The software does not have the necessary permissions to
access the given file path, or the file is already open in other
software.