LED Measurement System
User Manual
19
Ossila Limited © 2022
(II)
Axis Selection
In the characterisation tab the data plotted on the primary and secondary y-axes can be selected
using the drop-down boxes beneath the axes. Axes cannot be changed whilst a measurement is
being performed.
Figure 9.9.
Controls for the plot.
(III)
Show Primary Axis
•
Controls whether the data plotted on the primary (left) y-axis is displayed.
(IV)
Show Secondary Axis
•
Controls whether the data plotted on the secondary (right) y-axis is displayed.
9.3.8
Saving Data
Figure 9.10.
Settings and controls for saving data.
(I)
Save After Measurement
•
The program allows for data to be saved automatically, as well as manually once the
measurement is complete.
I.
For automatic saving, the ‘Save Directory’ and ‘Device Label’
fields must be filled in
before the measurement can start, these are detailed below.
Warning:
Automatic saving can be turned off for lifetime measurements. However,
manual
saving is unavailable
for lifetime measurements, so you will not be able to save your data if it
is turned off.
Содержание T2005
Страница 27: ......
