LED Measurement System
User Manual
17
Ossila Limited © 2022
9.3.4
Lifetime Settings
Figure 9.6.
Lifetime settings.
(I)
Duration
•
Set the total duration in hours for the lifetime measurement.
(II)
Interval
•
Set the time interval in minutes between performing repeat measurements of the device.
(III)
Hold Voltage
•
Set the voltage that all pixels will be held at between measurements.
I.
This can be set between -10 V and +10 V.
(IV)
Primary Axis Units
•
Set which property is plotted on the primary (left) y-axis.
(V)
Secondary Axis Units
•
Set which property is plotted on the secondary (right) y-axis.
9.3.5
Saving and Loading Settings
Figure 9.7.
Controls for saving and loading settings profiles.
(I)
Save Settings
•
Saves the current settings as a profile that can be loaded quickly for use at another time.
•
When clicked, you will be prompted to name the settings profile.
Содержание T2005
Страница 27: ......
