SECTION 4 - CONTROL COMPONENTS
31215825
4-15
Operator Programming Mode - (Level-3)
In the Operator Programming Mode the following items are
shown on the main menu (also see Table 4-1):
• Tilt Sensor
• Program
Note:
There are two production modules available at this time,
one for North/South American and European languages,
and one for Asian languages. All programmable items
between these modules are identical with the exception of
language selection.
Tilt Sensor
Allows viewing current tilt sensor individual X and Y direction
degree reading.
Program
Allows the Operator to program Level-3 items shown in Table
4-1:
Table 4-1. MVL/MSP Ground Control Module - Field Programmable Settings and Factory Preset
Level-2:
Service Level Settings
On LCD Display:
YES =
HIGH =
Level-3:
Operator Level Settings
NO =
LOW =
LEVEL
PROGRAMMABLE ITEM
FACTORY PRESET
SETTING RANGE
2
Back to Main
20MVL/MSP
Return to Programming Menu
3
Set Language
Note:
There are two production modules available,
one for North/South American and European
Languages, and one for Asian Languages.
1
1
- English
6
- Italian
2
- German
7
- Swedish
3
- Dutch
8
- Brazilian Portuguese
4
- French
9
- Finnish
5
- Spanish
2
1
- English
3
- Japanese
2
- Chinese
2
Set Maximum Lift Up Speed
100%
0 - 100%
2
Set Maximum Lift Down Speed
100%
0 - 100%
2, 3
Set Sleep Time
5 MINS
0 - 60 MINS
2
Set Polarity Of Left Pot Hole Input 1
2
0 - Disabled / 1 - LOW / 2 - HIGH
2
Set Polarity Of Right Pot Hole Input 2
2
0 - Disabled / 1 - LOW / 2 - HIGH
2
Set Polarity Of Up Limit/Elevation Input
HIGH
HIGH/LOW
2
Set Polarity Of Charger Inhibit
LOW
HIGH/LOW
2, 3
Set Polarity Of The Keypad Code
LOW
HIGH/LOW
2
Set Polarity Of Ancillary Input 1
LOW (a)
HIGH/LOW
2
Set Polarity Of Ancillary Input 2
LOW (b)
HIGH/LOW
2
Load Sensing (LSS)
O
N
ON/OFF
2, 3
Enable Detection Of Horn Open Circuit
NO
YES/NO
2, 3
Enable Detection Of Beacon Open Circuit
NO
YES/NO
2
Enable Obstruction Sensor System (OSS)
NO
YES/NO
2
Enable Detection Of Aux. #1 Open Circuit
NO
YES/NO
2
Enable Detection Of Aux #2 Open Circuit
NO
YES/NO
3
Forward Alarm Disable
NO
YES/NO
3
OSS Diagnostic
NO
YES/NO
2
Zero the On-Board Tilt Sensor
NO
YES/NO
3
View Tilt Sensor Readings
—
—
2
Brush Wear Sensor Timer Reset
—
BLANK/WORN
2
Ancillary 1 Input Inhibit
0
0 - 4
2
Ancillary 2 Input Inhibit
0
0 - 4
Go
to
Discount-Equipment.com
to
order
your
parts
