SECTION 4 - CONTROL COMPONENTS
31215825
4-19
Display/Controller Module - Install/Remove
Drive/Lift Mode Switch - Install/Remove
Horn Button Switch - Install/Remove
Key Switch - Install/Remove
(No key switch on Australian specification machines.)
1.
Display/Controller
Module (a)
2.
Mounting Screws
Note:
(a) Unplug all connections on the back of the module
before removing from console.
1.
Switch Assembly (a)
2.
Locking Tabs
Note:
(a) Remove rear cover, unplug switch wire, press tabs to
remove.
1
2
1
2
1.
Horn Button Switch (a)
2.
Lock Washer
3.
Nut
Note:
(a) Remove rear cover, unplug wire, remove nut and lock
washer then slide switch out of console.
1.
Key Switch (a)
2.
Notch
3.
Attach Nut
4.
Key
1
2
3
Note:
(a) Remove mounting bracket on bottom of console to
gain access to the key switch assembly.
Figure 4-29. Platform Console - Display Module
Figure 4-30. Platform Console - Drive/Lift Mode Select
Figure 4-31. Platform Console - Horn Switch Installation
Figure 4-32. Platform Console - Key Switch Installation
Go to
Discount-Equipment.com
to
order your
parts
