SECTION 4 - CONTROL COMPONENTS
4-20
31215825
E-Stop/ShutDown Switch - Install/Remove
Joystick Assembly - Install/Remove
Figure 4-33. Platform Console - E-Stop Switch Installation
1.
Loosen Switch Set
Screw
2.
Turn Switch 90°
3.
Pull Spring-Loaded
Release Lever Out
4.
Remove Barrel
Assembly
5.
Barrel Seal
6.
Switch to Body
Retainer Hooks (a)
7.
Switch Retainer Slots
Note:
(a) Use a small straight blade screwdriver to extend the
spring-loaded retainer hooks (6) out and release the
switch from the body.
1
2
4
5
3
7
6
Figure 4-34. Platform Console - Joystick Installation
1.
Joystick Assembly
2.
Attach Screws (Qty.-4)
3.
Nylon Washers (Qty.-4)
4.
Rubber Boot/Gasket
5.
Install/Remove
through the Access
Hole in Bottom of
Housing. (a) (b)
Note:
(a) Remove the console mounting bracket.
(b) Remove the key switch and e-stop switch to remove
joystick assembly through access hole in bottom of con
-
sole.
2
3
4
5
1
Go
to
Discount-Equipment.com
to
order
your
parts
