SECTION 2 - GENERAL
31215825
2-1
SECTION 2. GENERAL
2.1 MACHINE PREPARATION, INSPECTION, AND
MAINTENANCE
General
This section provides the necessary information needed by
those personnel that are responsible to place the machine in
operation readiness and maintain its safe operating condition.
For maximum service life and safe operation, ensure that all
the necessary inspections and maintenance have been com
-
pleted before placing the machine into service With proper
care, maintenance, and inspections performed per JLG's rec
-
ommendations, and with any and all discrepancies corrected,
this product will be fit for continued use.
Preparation, Inspection, and Maintenance
It is important to establish and conform to a comprehensive
inspection and preventive maintenance program. The follow
-
ing table outlines the periodic machine inspections and main
-
tenance recommended by JLG Industries, Inc. Consult your
national, regional, or local regulations for further requirements
for mobile elevating work platform. The frequency of inspec
-
tions and maintenance must be increased as environment,
severity and frequency of usage requires.
Pre-Start Inspection
It is the User’s or Operator’s primary responsibility to perform a
Pre-Start Inspection of the machine prior to use daily or at
each change of operator. Reference the Operation and Safety
Manual for completion procedures for the Pre-Start Inspec
-
tion. The Operation and Safety Manual must be read in its
entirety and understood prior to performing the Pre-Start
Inspection.
Pre-Delivery Inspection and Frequent Inspection
The Pre-Delivery Inspection and Frequent Inspection shall be
performed by a qualified JLG equipment mechanic. JLG Indus
-
tries, Inc. recognizes a qualified JLG equipment mechanic as a
person who, by possession of a recognized degree, certificate,
extensive knowledge, training, or experience, has successfully
demonstrated the ability and proficiency to service, repair, and
maintain the subject JLG product model.
The Pre-Delivery Inspection and Frequent Inspection proce
-
dures are performed in the same manner, but at different
times. The Pre-Delivery Inspection shall be performed prior to
each sale, lease, or rental delivery. The Frequent Inspection
shall be accomplished for each machine in service for 3
months; out of service for a period of more than 3 months; or
when purchased used. The frequency of this inspection must
be increased as environment, severity and frequency of usage
requires.
Reference the JLG Pre-Delivery and Frequent Inspection Form
and the Inspection and Preventative Maintenance Schedule
for items requiring inspection during the performance of
these inspections. Reference the appropriate areas of this
manual for servicing and maintenance procedures.
Annual Machine Inspection
The Annual Machine Inspection must be performed by a Fac
-
tory-Trained Service Technician on an annual basis, no later
than thirteen (13) months from the date of the prior Annual
Machine Inspection. JLG Industries, Inc. recognizes a qualified
JLG equipment mechanic as a person who has successfully
completed the JLG Service Training School for the subject JLG
product model. Reference the machine Service and Mainte
-
nance Manual and appropriate JLG inspection form for perfor
-
mance of this inspection.
Reference the JLG Annual Machine Inspection Form and the
Inspection and Preventative Maintenance Schedule for items
requiring inspection during the performance of this inspec
-
tion. Reference the appropriate areas of this manual for servic
-
ing and maintenance procedures.
For the purpose of receiving safety-related bulletins, it is
important that JLG Industries, Inc. has updated ownership
information for each machine. When performing each Annual
Machine Inspection, notify JLG Industries, Inc. of the current
machine ownership.
Preventative Maintenance
In conjunction with the specified inspections, maintenance
shall be performed by a qualified JLG equipment mechanic.
JLG Industries, Inc. recognizes a qualified JLG equipment
mechanic as a person who, by possession of a recognized
degree, certificate, extensive knowledge, training, or experi
-
ence, has successfully demonstrated the ability and profi
-
ciency to service, repair, and maintain the subject JLG product
model.
Reference Table 2-2, MVL/MSP - Preventive Maintenance &
Inspection Schedule, and the appropriate areas of this manual
for servicing and maintenance procedures. The frequency of
service and maintenance must be increased as environment,
severity and frequency of usage requires.
Go to
Discount-Equipment.com
to
order your
parts
