ORTEC RADEAGLET, Руководство пользователя

Страница: 52 / 60

b) After calibration, the instrument should have the potassium 1460 keV line well within ±0.25
(between 1457 keV and 1463 keV).
c) Using an external cesium calibration source: Place the source in front of the detector at a
minimum distance of 10 cm. Enter calibration check and wait for the threshold sum of the
peak counts to be collected. The system will then show you the report of the peak properties.
The resolution should not be greater than 7.3 %. The peak position deviation should not be
greater than 0.5 % after startup, corresponding to a shift of ±3.3 keV around the target value
of 661.6 keV.
d) If the peak position deviates, press CAL to calibrate the instrument. Repeat the acquisition of
the cesium reference in calibration mode and wait until new values for the peak assessment
appear. The peak should be positioned well within 0.2 %, ±1.7 keV of the target peak position
of 661.6 keV.
C.2 Troubleshooting
The RADEAGLET was developed using state-of-the-art quality standards for the system architecture and
the stability of all components. Nevertheless, it may not be free of mistakes and there might exist situa-
tions that were not covered by our quality testing.
In the rare event of a crash or a malfunctioning, we compiled a list of possible troubleshooting solutions.
C.2.1 System Switches Back to Black Screen
Solution: Unplug all cables from RADEAGLET. Open rear battery chamber and set the “on/off“ switch to
“off”. Wait at least 10 seconds. Put the switch back to the “on” state. If the problem reappears, please
contact our customer support.
C.2.2 System Keeps Running Although the Internal On/Off Switch is Set to Off
The internal on/off switch activates or deactivates the current flow between battery and main board. If
the main board is connected to USB, it will be powered via USB. The system may keep on running for a
short time after the battery was removed.
Solution: Unplug the USB cable. This will shutdown the power to the mainboard.
Page 52 of 60 RADEAGLET User Manual• Software 2.1.16 • Document 1.32o • 2017-12-15 © innoRIID GmbH