ORTEC RADEAGLET, Руководство пользователя

Страница: 40 / 60

Figure 32: Detect/ID Settings
entry, the nuclide category as second and the enabled and disabled status as third entry. Figure 33 ,
p. 41 shows this table. Use the button NEXT to go to the next table entry, CHANGE to switch between
the element options of the cell and BACK to go back to the upper level.
3.8.2 Activation and Deactivation of Nuclides
You can adjust this library in the following way: first, navigate through the list with NEXT . Once you arrive
at the desired nuclide, navigate to the CHANGE state button and change its state to switch the nuclide
on or off. The other properties of a nuclide can be changed here as well.
3.9 Retrieving System Version Information
In the ADVANCED MODE , there is a tab button called ABOUT . If you press this button, you will get an
overview (Figure 34 , p. 42 ) of all version numbers from the software and hardware subcomponents.
This information will change only when a new software or firmware update is loaded into the instrument.
3.10 GPS
Enter the ADVANCED MODE and select GPS (Figure 35 , p. 42 ).
The GPS status is always displayed in the top left corner of the status bar.
Page 40 of 60 RADEAGLET User Manual• Software 2.1.16 • Document 1.32o • 2017-12-15 © innoRIID GmbH