ORTEC RADEAGLET, Руководство пользователя

Страница: 27 / 60

counts located at the specific energy: in the example, in Figure 19 , p. 28 , 274 counts at an energy of
333 keV” is displayed in the middle upper section of the screen. As the cursor is moved, the counts in
that channel and energy will change.
The position of the cursor line (channels and energy) is displayed in the mid-upper part of the screen.
The cursor has an automatic acceleration. This allows you to move quickly to high energies and back.
When moving the cursor to the left side, crossing the zero position, it will wrap around and will place the
cursor at the high end of the spectrum.
The cursor also sets the anchor point for any zoom operation.
Figure 18: Spectrum mode using the cursor
First, use the NEXT button to switch through the button menu until you see the buttons CUR.LEFT and
CUR-RIGHT . These two buttons navigate the cursor along the x-axis. On the top of the screen you are
always informed about the current counts at your chosen channel/energy. Press NEXT to go to the next
menu level.
3.3.5 Using Zoom
After a cursor is placed on a specific energy, you can ZOOM in on this area. To do this, navigate through
the button menu by pushing NEXT until you see a ZOOM IN on the right button. Press ZOOM IN once to
magnify the spectrum at the location of the cursor. If you are in a zoomed view, you can press ZOOM OUT
to leave the zoomed view.
During zoom view, you can still move the cursor. Now, the movement of the cursor is much finer than in
the standard view. The cursor acceleration will help you to move quickly to a specific energy or channel.
© innoRIID GmbH RADEAGLET User Manual• Software 2.1.16 • Document 1.32o • 2017-12-15 Page 27 of 60