Ormec SMLC 160, Руководство по установке и эксплуатации

Страница: 42 / 66

ServoWire Motion & Logic Controller Manual WAGO I/O Installation & Operation
Verify the WAGO bus coupler or PFC is operating correctly. Its diagnostic LED’s should be illuminated as
follows:
•
On Green
•
Link Green
•
TxD/RxD Flash as data is Sent/Received
•
Error Should not be illuminated
•
I/O Green
Your WAGO Fieldbus coupler is now ready for communications on an Ethernet network.
WAGO Part List
Additional I/O modules may be supported. For the most recent list of supported WAGO I/O modules,
refer to the online help in ServoWire Pro.
WAGO ‐ ETH2 ‐ KIT Ethernet Fieldbus Coupler Kit, 100baseT, (incl. 750 ‐ 352 bus coupler, supply module, one
End Module and two 10 mm End Stops) See NOTE 1 below.
WAGO ‐ ETH ‐ KIT Ethernet Fieldbus Coupler Kit, 10baseT, (incl. 750 ‐ 342 bus coupler, one End Module and
two 10 mm End Stops) See NOTE1 below.
This model is deprecated. New applications should use WAGO ‐ ETH2 ‐ KIT
WAGO ‐ 750 ‐ 352 Ethernet Fieldbus Coupler, 100BaseT, 64 I/O modules for 256 inputs & 256 outputs max.
WAGO ‐ 750 ‐ 342 Ethernet Fieldbus Coupler, 10BaseT, 64 I/O modules for 256 inputs & 256 outputs max.
WAGO Digital Input Modules
WAGO ‐ 750 ‐ 400 2 ‐ Ch DC Input, Sourcing (high ‐ side switch), 24 VDC, 3.0 msec filter
WAGO ‐ 750 ‐ 401 2 ‐ Ch DC Input, Sourcing (high ‐ side switch), 24 VDC, 0.2 msec filter, high spd
WAGO ‐ 750 ‐ 410 2 ‐ Ch DC Input, Sourcing (high ‐ side switch), 24 VDC, 3.msec filter, 2 ‐ wire prox. switch
WAGO ‐ 750 ‐ 411 2 ‐ Ch DC Input, Sourcing (high ‐ side switch), 24 VDC, 0.msec filter, high spd, 2 ‐ wire prox.
Switch.
WAGO ‐ 750 ‐ 418 2 ‐ Ch DC Input, Sourcing (high ‐ side switch), 24 VDC, 3.0 msec filter, diagnostics w/ ack
WAGO ‐ 750 ‐ 419 2 ‐ Ch DC Input, Sourcing (high ‐ side switch), 24 VDC, 3.0 msec filter, diagnostics
WAGO ‐ 750 ‐ 412 2 ‐ Ch DC Input, Sourcing (high ‐ side switch), 48 VDC, 3.0 msec filter (see note 2)
WAGO ‐ 750 ‐ 424 2 ‐ Ch DC Input, Sourcing (high ‐ side switch), 24 VDC, Intruder Detection
WAGO ‐ 750 ‐ 402 4 ‐ Ch DC Input, Sourcing (high ‐ side switch), 24 VDC, 3.0 msec filter
WAGO ‐ 750 ‐ 403 4 ‐ Ch DC Input, Sourcing (high ‐ side switch), 24 VDC, 0.2 msec filter, high spd
WAGO ‐ 750 ‐ 408 4 ‐ Ch DC Input, Sinking (low ‐ side switch), 24 VDC, 3.0 msec filter
WAGO ‐ 750 ‐ 409 4 ‐ Ch DC Input, Sinking (low ‐ side switch), 24 VDC, 0.2 msec filter, high spd
WAGO ‐ 750 ‐ 414 4 ‐ Ch DC Input, Sourcing (high ‐ side switch), 5 VDC, 0.2 msec filter, high spd (see note
2)
WAGO ‐ 750 ‐ 422 4 ‐ Ch DC Input, Sourcing (high ‐ side switch), 24 VDC, 1.0 msec filter, w/ 10 msec ext.
WAGO ‐ 750 ‐ 415 4 ‐ Ch AC/DC Input, 24VAC/VDC, 20 msec filter, 2 ‐ wire connection (see note 2)
WAGO ‐ 750 ‐ 423 4 ‐ Ch AC/DC Input, Sourcing (high ‐ side switch), 24 VAC/VDC, 50 msec filter, w/ power
jumper contacts (supply module req’d for 24 VAC operation ) (see note 2)
34 SMLC ‐ 004a