OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 67
6.4.3. Motion Detection
MENU
EVENT
MOTION
The Motion detection can be used to notify user
of detected motion on each channel or all channel.
Channel
Configure All or each channel.
Sensitivity
Sensitivity can be configured from min.1 to max 10.
Area
Area configure detection when a motion is triggered.
User can select all or clear all. In case of configuring each channel, it is available to set all, clear all or define
user area.
User Area
When selecting per channel, user area it can be
configured.
1 grid size is
22x15
and factory default value is All
grid selected. If pushing user area, configuration
window for detection area. (I don’t understand.)
With direction key, select an area and press
[Enter] or click mouse. Use the following methods
to view previous menu: “ESC” button right mouse
button, or shift.
Users can set motion detection area in screen.
The motion detection zone by setting is indicated
in grey. If there is previously defined Motion
detection area, detection for the area is
terminated and detection is applied to all area in
contray case.
