OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 34
<Note>
1. HDD Re-using (Add Used)
You can use HDD that has been used before from DVR, in this case you do not need to do format and
delete the data.
How to use it? Please install previous HDD in the DVR, and go to “Disk Manager” menu and select the HDD
that you wish to re-use which is you just installed HDD, and
press “Enter” key then you will see the pop-up
message “This disk can be added without format / nevertheless, do you want format this disk?” and select
“NO” for re-use without format, and select “YES” for format.
3.5.6. Remote monitoring & control
Via Internet/Intranet, in remote site, user can access with PC.
3.5.6.1.
Ethernet Connection
Cut power and connect Ethernet cable to DVR and Network, then, input power.
<Reference>
To protect DVR damage, after connecting Ethernet cable, input Power.
Please, check Ethernet cable connection firmly.
Input power on DVR and check its connectivity.
3.5.6.2.
Network Setting
MENU
NETWORK
NETWORK
Ethernet
Set type as Ethernet and input IP, Netmask, Gateway, DNS. The way to input is using directional key or mouse
wheel.
PPPoE
Change type for Network menu into xDSL then go to xDSL menu. Change Port in Ethernet (User needs to
remember Port). Enter ID and Password assigned from PPPoE registration in xDSL menu. There are
connection confirm message when xDSL connection is secured.
