OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 17
2.
Installation
2.1.
Before Installation
DVR is high quality security device having large capacity of HDD and important curcuits. So any high
temperature occurred internally could make DVR work abnormally so please read through below installation
advice before installation.
The followings are advice in case DVR is installed in the Rack.
1.
Don’t keep inside of rack sealded where DVR is installed.
2. Keep airflow well thru inlet and outlet.
3. In case there is another device installed together, secure additional space and install air ventilation.
4. Installation of fan for air circulation is strongly recommended.
(Install filter around inlet or outlet for harmful substances)
5. Keep temperature around DVR as 0°C~40°C.
2.1.1. RACK installation
Engage rack brackets on both side of DVR using screw.
Make sure to safely secure bracket and screws are place properly.
2.1.2. Caution for HDD installation
1. HDD is easy to get damaged even in small shock so please try not to give any shock on the HDD during
installation.
2. Be careful in handling cables not to take off insulated coat during installation.
3. Be careful not to lose screws and parts.
4. (In case screws and parts are not engaged well, products might not be working properly)
5. Check HDD compatible list before adding HDD.
6. (Please check with CS team for compatible list)
7. HDD used in PC or other DVR model must be re formatted and partition table should be deleted for re-use
in this product.
2.1.3. HDD installation
1. Loosen a bracket screw from DVR.
