OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 3
0.
Introduction
0.1.
Warning
Warning
Please do not bend or press power cord by force which could lead to fire.
Be careful not to pull
Do not pull power cord by force or with wet hands to avoid fire or electric shock.
In case of changing built-in lithium battery, it should be replaced with same brand or similar one to prevent a danger of
explosion. Since old batteries could be a factor of environment contamination, please disposed of them properly.
Do not throw the batteries in fire or heating units. Neither short circuit nor disassembly is prohibited. Do not recharge
battery used for remote controller.
Do not open the top cover otherwise it could lead to electric shock and product damage.
The previous recorded data is deleted if record continues when HDD is full so please check disk setup status.
Manufacturer takes no responsibility for any damaged data due to customer’s carelessness or negligence.
Caution
Do not place heavy objects on the top of the produc, it will damage the unit
Product is for indoor use only and it is not for outdoor use. Use product to its environmental specifications
(Temperature & Humidity). To clean the product, gently wipe the outside with a clean dry cloth.
Product uses AC power of 110V ~ 240V. Be cautious not to cause electric damages to the product.
Be careful not to drop the product. Physical shocks may harm the product including internal HDD. In addition, please
make sure the product is secured after installation.
Product is made of metal you can hurt another human if you throw or used as a weapon. Keep away from the reach
of children.
If Product does not operate properly, please contact the closest ORION TECHNOLOGY A/S distributor for service.
Tampering or disassembling the product will void the warranty.
The product can transmit real time video over network or internet and can be used for monitoring purpose based on
installation. So please check and review related regulations before installation.
Experience and technical skills are needed for the installation of this product. Improper installation may cause fire, electric
shocks, or defects. Any installation job should be performed by the vendor you purchased this product from.
The content of this manual can differ according to firmware or Software upgrading, and the standard and appearance of
products may be changed for the improvement of quality without an advance notice.
System Power Off
In case user turn off device by force while device is working, it could give damage on HDD and device so please turn off
device safely using power button located in the front panel.
Working Temperature
The working temperature of the product is 5°C~45°C or 41°F~113°F. Product may not work properly out of recommended
working temperature range for a long period of time.
Please keep this product within recommended temperature range.
