Oracle SG-EMFCOE2-Q-SR, Руководство по установке

Страница: 68 / 70

LEDs Turn On Sporadically After Pressing the Attention Button For Hot-Plug Removal
LEDs Turn On Sporadically After Pressing the Attention
Button For Hot-Plug Removal
Bug 15675267
Issue:
When attempting to prepare the adapter for hot-plug removal, the LEDs are not behaving as
expected after pressing the Attention button on the adapter.
Workaround:
This is due to the Attention button remaining depressed or becoming wedged in the faceplate of
the module during hot-plug removal, which causes the initialization process of the Converged
Network Adapter to start. To prevent this from occurring, press the Attention button again to
ensure it is fully released.
qlge
Driver Keeps Sending NOTICE: Messages to the
Console
Bug 15639510
Issue:
Every time the cable is plugged in or out, the console displays these “NOTICE:” messages.
Workaround:
None. You can ignore these messages as they do not affect performance in any way.
The Adapter Is Not Logging Into the Brocade 8000 Switch
Bug 15622146
Issue:
When configuring an Oracle Solaris 10 system with the adapter, the host-side adapter might not
log into the Brocade 8000 switch unless VLAN 1002 is configured on the switch; specifically
on the port to which the adapter is connected.
68 Sun Storage 10 GbE FCoE ExpressModule Converged Network Adapter From QLogic Installation Guide For Adapter
Models SG-EMFCOE2-Q-SR, SG-XEMFCOE2-Q-SR, SG-EMFCOE2-Q-TA, SG-XEMFCOE2-Q-TA, and 7101682 •
January 2017