To Install the Driver
tar -xvzf qlge-x.x.x.x.tgz
3.
Change to the driver
src
directory as follows:
cd qlge/
4.
Compile the driver module by issuing the following command:
make install
The binary is installed as follows:
/lib/modules/[KERNEL_VERSION]/kernel/drivers/net/qlge/qlge.[k]o
Note -
The install locations shown in this section are the default locations. Some Linux
distributions might use other locations.
To Install the Driver
Load the module by issuing the following command:
modprobe -v qlge
<
parameter
>=<
value
>
When utilizing an out-of-box driver for SLES 10 SP2, follow these steps to ensure that the
module loads on reboot:
To Rebuild the Driver
1.
Rebuild the RAMDISK as follows:
a.
Open
/etc/sysconfig/kernel
.
b.
Edit the
INITRD_MODULES=
line to append
qlge
; for example:
INITRD_MODULES=piix thermal fan reiserfs
qlge
c.
Issue the
mkinitrd
command; for example:
48
Sun Storage 10 GbE FCoE ExpressModule Converged Network Adapter From QLogic Installation Guide For Adapter
Models SG-EMFCOE2-Q-SR, SG-XEMFCOE2-Q-SR, SG-EMFCOE2-Q-TA, SG-XEMFCOE2-Q-TA, and 7101682 •
January 2017
Содержание SG-EMFCOE2-Q-SR
Страница 2: ......
