Oracle SG-EMFCOE2-Q-SR, Руководство по установке

Страница: 51 / 70

Installing Software for the Oracle VM OS and VMware Technology
3.
At the bottom of the table, in the Software for: row, click Linux.
4. Locate the QLogic CLI and GUI utilities for your Linux OS version.
5. Click the utility name to download the utility to a local file system.
6. For additional information, click the Read Me link for the utility.
Installing Software for the Oracle VM OS and VMware
Technology
The Converged Network Adapter drivers included on the Oracle VM and VMware distribution
are sufficient for supporting the Converged Network Adapter. No further action is required.
To verify that the drivers loaded successfully, look for the following lines in the
/var/log/
vmkernel
file:
Initialization for qle8100_707_vmw succeeded with module ID 2.
[
timestamp
] b12-4600a vmkernel: 0:00:01:18.878 cpu1:1041)qle8100_707_vmw loaded
successfully.
The first line indicates that the fibre channel driver loaded successfully.
Installing Software for the Windows OS
This section describes how to download and install the fibre channel drivers required by the
Converged Network Adapter. It also describes how to install diagnostic support software for the
Converged Network Adapter. This section contains the following topics:
■
“Downloading the Windows Drivers” on page 51
■
“Installing the Windows Drivers” on page 53
■
“Diagnostic Support for the Windows OS” on page 60
Downloading the Windows Drivers
The Converged Network driver requires download of both the QLogic FCoE driver and
networking driver (QLogic 10 GbE NDIS miniport driver). This section provides procedures for
downloading both drivers.
Chapter 3 • Software Installation 51