Oracle SG-EMFCOE2-Q-SR, Руководство по установке

Страница: 22 / 70

Installing the Hardware
■
Place the adapter on a properly grounded antistatic work surface pad when it is out of its
protective antistatic bag.
Installing the Hardware
Follow the procedures in this section to install the hardware:
■
“To Install the Converged Network Adapter” on page 22
■
“To Connect the Optical Cables” on page 24
■
“To Connect the Copper Cables” on page 25
Note -
Because the Windows Server 2008 R2 OS does not have inbox driver support
for the Converged Network Adapter, you must ensure that both the Fibre Channel and
Ethernet drivers are installed prior to connecting the adapter to an Ethernet or Fibre
Channel network. For more information, see “Installing Software for the Windows
OS” on page 51 .
To Install the Converged Network Adapter
1. If the system in which you are installing the adapter is running the Oracle Solaris
OS, install the two driver patches for your platform, as listed in “Installing
Software for the Oracle Solaris OS” on page 41 .
2. Attach an ESD wrist strap (see “Observing ESD and Handling
Precautions” on page 21 ).
3. Refer to your system installation or service manual to determine an appropriate
PCI Express slot in which to install the Converged Network Adapter.
4. Refer to your system documentation to shut down, power off, and unplug the
system, if required.
22 Sun Storage 10 GbE FCoE ExpressModule Converged Network Adapter From QLogic Installation Guide For Adapter
Models SG-EMFCOE2-Q-SR, SG-XEMFCOE2-Q-SR, SG-EMFCOE2-Q-TA, SG-XEMFCOE2-Q-TA, and 7101682 •
January 2017