To Install the FCoE Driver
To Install the FCoE Driver
After installing the Converged Network Adapter and restarting the system, the Windows OS
detects the newly installed device and displays the Found New Hardware with FCoE Controller
message. The Found New Hardware wizard launches.
Note -
This procedure requires a system configured with the latest Service Pack and Windows
Update.
1.
On the first window of the Found New Hardware wizard, click Search for a
suitable driver for my device (recommended), and then click Next.
2.
Browse to the location on the disk where you downloaded the FCoE driver, then
click Next.
Windows displays a message, letting you know it found a driver for this device.
3.
On the Completing the Found New Hardware Wizard window, click Finish.
4.
If the system displays the following message, click Yes to restart the system:
System Settings Change. Windows has finished installing a new device. The software that
supports your device requires that you restart your computer. You must restart your
computer before the new settings will take effect. Do you want to restart your computer
now?
To Install the Driver on Windows 2008
1.
Power down the system.
2.
Insert the card into a proper PCIe slot.
3.
Power on the system.
When the system boots up, the PNP subsystem displays a dialog box informing you that new
hardware (Fibre Channel Controller) has been found and prompts you to install the driver.
4.
Do one of the following:
■
If you are installing the driver from removable media, follow these steps:
a.
Insert the media.
54
Sun Storage 10 GbE FCoE ExpressModule Converged Network Adapter From QLogic Installation Guide For Adapter
Models SG-EMFCOE2-Q-SR, SG-XEMFCOE2-Q-SR, SG-EMFCOE2-Q-TA, SG-XEMFCOE2-Q-TA, and 7101682 •
January 2017
Содержание SG-EMFCOE2-Q-SR
Страница 2: ......
