Oracle SG-EMFCOE2-Q-SR, Руководство по установке

Страница: 45 / 70

To Build the FCoE Driver
■
“To Build the FCoE Driver ” on page 45
■
“Loading the Newly Built FCoE Driver” on page 46
■
“Deploying the Networking Driver” on page 47
Note -
You do not need to install any drivers for the Oracle Linux OS.
To Build the FCoE Driver
The driver installation makes extensive use of the
build.sh
script, which is located in driver
source (
extras/build.sh
).
From the source code, you can build a
qla2
xxx
.ko
module for the host. You can then choose
either to manually or automatically load the driver, as described in “Loading the Newly Built
FCoE Driver” on page 46 .
1.
In the directory that contains the source driver file,
qla2
xxx-x
.
yy.zz
-dist.tgz
, enter
the commands shown in the following example.
# tar -xvzf *.tgz
# cd qla2xxx-src-u.vv.ww.xx.yy.zz-k
2. Build and install the driver modules from the source code by executing the
build.sh
script.
# ./extras/build.sh install
This build script does the following:
■ Builds the driver
.ko
files.
■
Copies the
.ko
files to the appropriate directory:
For RHEL:
/lib/modules/2.6.../kernel/drivers/scsi/qla2xxx
For SLES:
/lib/
modules/2.6.../update
3. Choose how you want to load the driver, as described in “Loading the Newly
Built FCoE Driver” on page 46 .
Chapter 3 • Software Installation 45