Oracle SG-EMFCOE2-Q-SR, Руководство по установке

Страница: 49 / 70

To Remove the Driver
mkinitrd -i initrd-2.6.16.60-0.21-smp-qlge -k vmlinuz-2.6.16.60-0.21-smp -M boot/
System.map-2.6.16.60-0.21-smp
Note -
Type the entire preceding command on a single line.
d.
Modify the
menu.lst
file to include the new RAMDISK as an option to boot
from.
e. Reboot the system.
2.
Modify the variables in the
sysconfig
as follows:
a.
Open the following file to edit:
/etc/sysconfig/kernel
b. Locate the following line:
MODULES_LOADED_ON_BOOT=""
c.
Add
qlge
to the line; for example:
MODULES_LOADED_ON_BOOT=" qlge "
d. Reboot to automatically load the module.
If the module does not auto-load on reboot, follow this step (this should not be necessary
with RHEL 5.3):
e. Open the
/etc/modprobe.conf
file and add the following line:
alias eth
#
qlge
Where # is the Ethernet port number for the adapter.
To Remove the Driver
1.
Issue the following command:
Chapter 3 • Software Installation 49