Oracle SG-EMFCOE2-Q-SR, Руководство по установке

Страница: 35 / 70

Updating the PXE
Adapter Type Address Slot Bus Device Function
QEM8152 E800 01 05 00 2
----------------------------------------------------------
Fast!UTIL Options
Configuration Settings
Scan Fibre Devices
Fibre Disk Utility
Loopback Data Test
Select Host Adapter
Exit Fast!UTIL
6.
Highlight Exit Fast!UTIL and press Enter.
The following QLogic Fast! UTIL menu is displayed.
QLogic Fast!UTIL
Exit Fast!UTIL
----------------------------------
Reboot System
Return to Fast!UTIL
Note -
If the QLogic BIOS or PXE banner does not display during POST, confirm that the EM
FUNC OPTION ROM is enabled in the system BIOS.
Updating the PXE
If you are installing the adapter in an x86 system, and you plan to use Preboot Execution
Environment (PXE) functionality, you might need to update the Converged Network Adapter
PXE under the BIOS and UEFI environments. This section provides the following PXE
information:
■
“PXE Operating Systems” on page 35
■
“Package Files” on page 36
PXE Operating Systems
Supported operating systems for the BIOS PXE installation include:
Chapter 2 • Hardware Installation and Removal 35