Oracle SG-EMFCOE2-Q-SR, Руководство по установке

Страница: 66 / 70

To Manually Unconfigure the Unusable Device
Issue:
You might encounter this error message after issuing the l
uxadm -e forcelip
command from a
system with the following configuration:
■
Oracle Solaris 10 10/09 OS running
■
Adapter installed and connected to a Brocade 8000 FCoE switch
■
Brocade 8000 FCoE switch connected to a tape zone on a FC SAN with an SL48-LTO4 FC
tape library
If you issue the l
uxadm -e forcelip
command upon the removal of a device from the tape
zone, this message might be generated:
Error: FCIO_RESET_LINK ioctl failed.
Could not reset the loop
Workaround:
To avoid encountering the error message, manually unconfigure the unusable device (the device
removed from the tape zone) at the attachment point of the device:
To Manually Unconfigure the Unusable Device
1.
Issue the
cfgadm -al
unusable-device-attachment-point
command to list the unusable
device, as described in the following procedure.
In this example, the attachment point of the unusable device is
c1
.
> cfgadm -al c1
Ap_Id Type Receptacle Occupant
Condition
c1 fc-fabric connected configured
unknown
c1::12340080e512b600 disk connected configured
unknown
c1::123400a0b82804a6 disk connected configured
unusable
c1::123410a0008beb2a tape connected configured
unknown
>
2. Issue the
cfgadm -c unconfigure -o unusable_SCSI_LUN
unusable-device-attachment-
point
command to unconfigure the unusable devices on the attachment point.
66 Sun Storage 10 GbE FCoE ExpressModule Converged Network Adapter From QLogic Installation Guide For Adapter
Models SG-EMFCOE2-Q-SR, SG-XEMFCOE2-Q-SR, SG-EMFCOE2-Q-TA, SG-XEMFCOE2-Q-TA, and 7101682 •
January 2017