7
1-2 Connecting the Devices
Preparation
1-2-3
Connecting the Camera to the Controller
1.
Insert the camera’s connector into the
Controller’s Camera connector.
2.
Tighten the two fastening screws of the
Controller’s Camera connector.
Tightening torque: 0.15 Nm.
Important
Do not touch the terminals inside the connector.
Important
Fasten the connector while making sure that it is not subjected to vibration or
shock.
Important
Do not mount the Controller in such a way that a load is steadily applied on
the connector, for example, with tension applied to the cables.
Disconnection procedure
Loosen the fastening screws (two locations) to unlock the camera’s cable, and
then pull the camera’s cable connector straight out.
Important
Be sure to hold the connector of the camera to disconnect it. Failure to do so
may damage the camera’s cable.
Important
Do not touch the terminals inside the connector.
Z01E-EN-01+ZFX+SettingGuide.book Seite 7 Mittwoch, 13. Februar 2008 2:38 14