9
1-3 Installing the Controller
Preparation
Important
Attach the Exhaust Unit (supplied) to the Controller when installing other
devices adjacently on the same DIN track as the Controller.
Removing procedure
1.
Pull the Controller’s lower hook downwards.
2.
Lift up the Controller from its bottom to re-
move it from the DIN track.
1-3-3
Mounting on the Panel
1.
Install the long Panel Mount
Adapters on the four holes on the
Controller.
2.
Install the short Panel Mount
Adapters on the two holes on the
long Panel Mount Adapter.
3.
Install the Controller with Mount
Adapters attached onto the panel
from the front.
4.
Hook the hooks of the mounting
bracket onto the two holes (two
each at top and bottom) of the
longer Mount Adapters and tight-
en the screws.
Tightening torque: 1.2 N•m.
5.
Make sure that the Controller is
firmly fixed on the panel.
PULL OPEN
1
2
3
4
OMRON
ZFX-C10
OUTPUT RUN
ERROR ENABLE
MENU
RUN
SD
CARD
ADJ
USB
AUTO
ESC
SET
DIN track (sold separately)
End Plate (sold separately)
PFP-M
PFP-100N (1 m)
PFP-50N (0.5 m)
PFP-100N2 (1 m)
Exhaust Unit
1
2
1
1
2
2
3
Panel mount adapters
Panel
4
Mounting bracket
Z01E-EN-01+ZFX+SettingGuide.book Seite 9 Mittwoch, 13. Februar 2008 2:38 14
