51
4-8 ITEM Overview (Width)
Item Overview
4-8
ITEM Overview (Width)
This item detects two edges, based on the change of brightness. Use this
item to measure the distance between two edges of a measurement target.
Another setting
Start
point
End
point
Measurement region
Setup
Measurement
Edge 1
(start point side)
Edge 2
(end point side)
Dimension
Edge 1 is searched from start point towards the end point.
Edge 2 is searched from end point towards the start point.
Measurement mode
Average (default) / Maximum / minimum
Set the definition of the distance.
Color mode
Filter mode (default) / Pickup mode
This is same setting as position. (See the “Position”)
Split size
1 to 99 (default value: 1)
This is same setting as position. (See the “Position”)
Color 1, 2
Light --> Dark (default) / Dark --> Light
This is same setting as position. (See the “Position”)
Edge level 1, 2
0 to 100 (%) (default value: 50)
This is same setting as position. (See the “Position”)
Noise level 1, 2
0 to 255 (default value: 20)
This is same setting as position. (See the “Position”)
Noise width 1, 2
0 to 255 (default value: 0)
This is same setting as position. (See the “Position”)
Width when [Maximum] is selected
Width when [Minimum] is selected
Start point
End point
Split size
Z01E-EN-01+ZFX+SettingGuide.book Seite 51 Mittwoch, 13. Februar 2008 2:38 14
