53
4-10 ITEM Overview (Angle)
Item Overview
4-10 ITEM Overview (Angle)
This item uses two “Position”items. Specifically this Item finds the two edges
in two measurement regions and outputs the angle between two edge points.
Angle
Angle is calculated according to the
positional relationship between the 2
edge positions.
Another setting
Setup
Measurement
Measurement region
Change of brightness: light --> dark
The edges are searched in the two measurement regions
according the preset direction and change of brightness. The
inclination of the straight line made by two points is calculated.
Color mode
Filter mode (default) / Pickup mode
This is same setting as position. (See the “Position”)
Measurement mode 1, 2
Average (default) / Peak / bottom
This is same setting as position. (See the “Position”)
Split size 1, 2
1 to 99 (default value : 1)
This is same setting as position. (See the “Position”)
Color 1, 2
Light --> Dark (default) / Dark --> Light
This is same setting as position. (See the “Position”)
Edge level 1, 2
0 to 100 (%) (default value: 50)
This is same setting as position. (See the “Position”)
Noise level 1, 2
0 to 255 (default value: 20)
This is same setting as position. (See the “Position”)
Noise width 1, 2
0 to 255 (default value: 0)
This is same setting as position. (See the “Position”)
: Edge position 1
: Edge position 2
-180 to 0°
0 to 180°
Z01E-EN-01+ZFX+SettingGuide.book Seite 53 Mittwoch, 13. Februar 2008 2:38 14
