background image

33

SECTION 3

Run-Mode Measurement Process

There are two measurement-mode. In TRIG measurement-mode, TRIG is the
first event and one measurement is done. In continuous measurement-mode,
continuous measurement command is the first event and measurements are
done repeatedly until stop command.

TRIG

How to input

1.

Serial Command via RS-232C/422, USB, Ethernet
It’s needed to send the command from external device (e.g. PC, PLC)
Please see the detail in “Serial Communication Command Reference“

2.

Parallel (TRIG Signal)
One measurement is done if TRIG signal is turn ON.

Continuous Measurement Command and Stop Command

How to input

1.

Serial Command via RS-232C/422, USB, Ethernet 
It’s needed to send the command from external device (e.g. PC, PLC)
Please see the detail in “Serial Communication Command Reference”

2.

Parallel Communication

• Continuous Measurement Command

It’s needed to send the command from external device (e.g. PLC)
Please see the detail in “User’s manual”
During continuous measurement, it’s needed to keep the state of input
command.

• Stop Command (Stop condition)

If the status of continuous measurement command breaks, continuous
measurement is ended.

TRIG Measurement-Mode

Continuous Measurement-Mode

TRIG

Measurement

Result output

Continuous Measurement Command

Measurement

Result output

Stop Command ?

End

Wait for next TRIG

Yes

No

Z01E-EN-01+ZFX+SettingGuide.book  Seite 33  Mittwoch, 13. Februar 2008  2:38 14

Содержание ZFX -
































































Отзывы: