Omron SYSMAC W398-E1-1, Руководство по эксплуатации

Страница: 96 / 127

82
Monitoring NCs Section 8-1
8-1 Monitoring NCs
Use the following procedure to display NC Unit present positions, error codes,
sequence numbers, and I/O status on the NC Monitor
.
1,2,3... 1. On the project tree, select the NC Unit to be monitored and select Online
(L)/Monitor (M). If another NC Unit is to be monitored after NC monitoring
has been started, select the new NC Unit from the Unit No. field.
Example: The following will be displayed as the 4-axis NC Unit Monitoring
Screen.
The present position of each axis is shown under Present Position; the er-
ror code number and description are shown under Error Code; and the se-
quence number and I/O status of each axis are shown under Status. A red
light indicates that an I/O signal is ON.
For error details, refer to the relevant NC Unit Operation Manual, or click
the Help Button.
8-2 Multiple Unit Monitoring
Use the following procedure to monitor the status of up to four NC Units simul-
taneously.
1,2,3... 1. On the project tree, select an PC or NC, and then select Online (L)/Mon-
itor Units (F). After starting Unit monitoring, the Units selected for moni-
toring can be changed using the screen’s four drop-down lists.