Omron SYSMAC W398-E1-1, Руководство по эксплуатации

Страница: 67 / 127

53
Setting Editing Screens Section 4-2
To Move the Screen
Settings that cannot be displayed in a single screen can be viewed either by
pressing the PageDown Key or by using the scroll bar on the right-hand side
of the screen.
4-2-3 Switching Setting Display Formats
Settings on any Setting Editing Screen can be displayed in either hexadecimal
or decimal format.
Switching the Current
Settings Display Format Switch the display format by selecting Hexadecimal or Decimal under View/
Change Display on the Setting Editing Screen or by right-clicking and select-
ing Hexadecimal or Decimal from the pop-up menu.
Example: The following screens will be displayed for speed settings in hexa-
decimal (right) and decimal (left) formats
Switching the Settings
Display Format on Startup Set the display format when starting up CX-Position by selecting Tools/
Options/Default Display Format. Decimal is the default display format. To
switch to hexadecimal display, select the Hexadecimal Display option.
4-2-4 Clearing Settings
Set parameter settings can be made into default settings and non-parameter
setting ranges can be cleared.
To Clear to Default
Settings Use the following procedure to clear axis settings to their default values.
1,2,3... 1. With the Parameter Setting Editing Screen enabled, either select Edit/De-
faults Setting, or right-click and select Defaults Setting from the pop-up
menu.
2. Select the axis for which settings are to be cleared to the defaults.
3. Click the OK Button.
4. A dialog box will be displayed asking if the settings should be returned to
their default values. Click the OK Button.
To Clear Setting Ranges Non-parameter settings can also be cleared.
Decimal Notation
Hexadecimal Notation