Omron SYSMAC W398-E1-1, Руководство по эксплуатации

Страница: 73 / 127

59
Editing Acceleration/Deceleration Time Settings Section 4-6
4-6 Editing Acceleration/Deceleration Time Settings
4-6-1 Acceleration/Deceleration Time Setting Screen
On the project tree, either double-click Edit Accel/Decel, or select it and press
the Enter Key.
Example: The following will be displayed as the 4-axis NC Unit Acceleration/
Deceleration Time Setting Editing Screen.
4-6-2 Editing Acceleration/Deceleration Time Settings
The acceleration/deceleration time setting range is from 00000000 to
0003D090 Hex (0 to 250,000) (ms). After the settings have been entered and
the Enter Key pressed, the cursor will move to the next setting.
Example: The following will be displayed as the Acceleration/Deceleration
Time Setting Editing Screen.
To Clear to Default
Settings Use the following procedure to clear specific settings to their default values.
(Refer to 4-2-4 Clearing Settings for details.)
1,2,3... 1. On the acceleration/deceleration Setting Editing Screen, select the set-
tings to be cleared to their default values, or designate the range by clicking
and dragging.
2. Select Edit/Clear
To Copy Axes For 2-axis and 4-axis NC Units, data can be copied from one axis to another
axis by selecting the source and destination axes. (Refer to 4-2-5 Copying
Axis Settings for details.)
1,2,3... 1. Select Edit/Copy Axis.
2. Under From and To, select the axes to be copied from and to respectively.
3. Click the OK Button.