Omron SYSMAC W398-E1-1, Руководство по эксплуатации

Страница: 109 / 127

95
NC Unit Error Logs Section 10-1
Backlash com-
pensation Backlash compensa-
tion error 1700 The axis parameters’ backlash
compensation setting is outside
the settable range (0 to 9,999
pulses). In this condition, only the data
transfer (read or write) and data
save operations can be performed.
All of the axis parameters will be
returned to their default values.
After correcting the appropriate
axis parameters, reset the power
supply or restart the NC Unit.
Backlash compensa-
tion speed error 1710 The axis parameters’ backlash
compensation speed setting
exceeds the maximum speed set-
ting.
Software limits CW software limit
error
1800 The axis parameters’ CW software
limit setting is outside the settable
range (-1,073,741,823 to
1,073,741,823).
CCW software limit
error 1801 The axis parameters’ CCW soft-
ware limit setting is outside the set-
table range (-1,073,741,823 to
1,073,741,823).
Sensor inputs Emergency stop
input 6000 An emergency stop signal has
been input. After clearing the emergency stop
input, execute RELEASE PRO-
HIBIT/ERROR RESET.
For a limit input, execute
RELEASE PROHIBIT/ERROR
RESET and feed in the opposite
direction from the limit stop.
Check the axis parameters’ signal
type setting (N.C. or N.O.).
CW limit stop 6100 A CW limit input signal has been
input.
CCW limit stop 6101 A CCW limit input signal has been
input.
Group Name Code Cause Remedy