![background image](http://html.mh-extra.com/html/omron/sysmac-cpm2b/sysmac-cpm2b_operation-manual_1633427021.webp)
3
CPM2B Features and Functions
Section 1-1
Built-in Motor Control Capability
Synchronized Pulse
Control
(Transistor Outputs Only)
Synchronized pulse control provides an easy way to synchronize the opera-
tion of a peripheral piece of equipment with the main equipment. The output
pulse frequency can be controlled as some multiple of the input pulse fre-
quency, allowing the speed of a peripheral piece of equipment (such as a sup-
ply conveyor) to be synchronized with the speed of the main piece of
equipment.
High-speed Counters and
Interrupts
The CPM2B has a total of five high-speed counter inputs. The one high-speed
counter input has a response frequency of 20 kHz/5 kHz and the four interrupt
inputs in counter mode have a response frequency of 2 kHz.
The high-speed counter can be used in any one of the four input modes: dif-
ferential phase mode (5 kHz), pulse plus direction input mode (20 kHz), up/
down pulse mode (20 kHz), or increment mode (20 kHz). Interrupts can be
triggered when the count matches a set value or falls within a specified range.
The interrupt inputs in counter mode can be used for incrementing counters or
decrementing counters (2 kHz) and trigger an interrupt (executing the inter-
rupt program) when the count matches the target value.
Easy Position Control with
Pulse Outputs
(Transistor Outputs Only)
CPM2B PLCs with transistor outputs have two outputs that can produce
10 Hz to 10 kHz pulses (single-phase outputs).
When used as single-phase pulse outputs, there can be two outputs with a
frequency range of 10 Hz to 10 kHz with a fixed duty ratio or 0.1 to 999.9 Hz
with a variable duty ratio (0 to 100% duty ratio).
When used as pulse plus direction or up/down pulse outputs, there can be
just one output with a frequency range of 10 Hz to 10 kHz.
High-speed Input Capabilities for Machine Control
High-speed Interrupt Input
Function
There are four inputs used for interrupt inputs (shared with quick-response
inputs and interrupt inputs in counter mode) with a minimum input signal width
of 50
µ
s and response time of 0.3 ms. When an interrupt input goes ON, the
main program is stopped and the interrupt program is executed.
Quick-response Input
Function
There are four inputs used for quick-response inputs (shared with interrupt
inputs and interrupt inputs in counter mode) that can reliably read input sig-
nals with a signal width as short as 50
µ
s.
Stabilizing Input Filter
Function
The input time constant for all inputs can be set to 1 ms, 2 ms, 3 ms, 5 ms,
10 ms, 20 ms, 40 ms, or 80 ms. The effects of chattering and external noise
can be reduced by increasing the input time constant. (The input time con-
stant is fixed to 1 ms for 40-point and 64-point Input Expansion I/O Board.)
Other Functions
Interval Timer Interrupts
The interval timer can be set between 0.5 and 319,968 ms and can be set to
generate just one interrupt (one-shot mode) or periodic interrupts (scheduled
interrupt mode).
Analog Settings
There are two controls on the CPU Board that can be turned to change the
analog settings (0 to 200 BCD) in IR 250 and IR 251. These controls can be
used to easily change or fine-tune machine settings such as a conveyor belt’s
pause time or feed rate.
DIP Switch Inputs
A DIP switch is provided that controls the status of four input bits.
Encoder
CPM2B
Motor driver Motor
Pulses are output as a fixed multiple of the input frequency.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Содержание SYSMAC CPM2B
Страница 4: ...iv Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Страница 6: ...vi Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Страница 216: ...198 Index Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...