![background image](http://html.mh-extra.com/html/omron/sysmac-cpm2b/sysmac-cpm2b_operation-manual_1633427066.webp)
48
Assembling the CPM2B Boards
Section 3-3
• Locations near to power supply lines.
3-2-2
Panel/Cabinet Installation
Consider PLC operation, maintenance, and surrounding conditions when
installing the CPM2B in a panel or cabinet.
Overheating
The ambient operating temperature range for the CPM2B is 0
°
C to 55
°
C. Be
sure that there is adequate ventilation for cooling.
• Allow enough space for air circulation.
• Do not install the CPM2B above equipment that generates a large amount
of heat, such as heaters, transformers, or large resistors.
• Install a cooling fan or system when the ambient temperature exceeds
55
°
C.
Electrical noise
Power lines and high-voltage equipment can cause electrical noise in the
PLC.
• Do not install the CPM2B in a panel or cabinet with high-voltage equip-
ment.
• Allow at least 200 mm between the CPM2B and nearby power lines.
Accessibility
Ensure that the CPM2B can be accessed for normal operation and mainte-
nance. High-voltage equipment, power lines, and moving machinery could be
dangerous if they are in the way during routine operations.
3-3
Assembling the CPM2B Boards
Board Assembly
Up to 3 Expansion I/O Boards can be connected to a CPM2B CPU Board.
The following diagram shows how to assemble the Boards. The screws and
standoffs are included with the CPU Board, Expansion I/O Board, and Mount-
ing Bracket.
Note Use M3 screws for the standoffs and tighten to a torque of 0.5 N•m.
Control panel
Fan
Air vent
CPM2B
CPM2B
200 mm min.
200 mm min.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Содержание SYSMAC CPM2B
Страница 4: ...iv Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Страница 6: ...vi Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Страница 216: ...198 Index Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...