![background image](http://html.mh-extra.com/html/omron/sysmac-cpm2b/sysmac-cpm2b_operation-manual_1633427043.webp)
25
Specifications
Section 2-1
2-1-2
Characteristics
Item
CPU Boards
With relay outputs
With transistor outputs
Control method
Stored program method
I/O control method
Cyclic scan with direct output (Immediate refreshing can be performed with
IORF(97).)
Programming language
Ladder diagram
Instruction length
1 step per instruction, 1 to 5 words per instruction
Instructions
Basic instructions
14
Special
instructions
105 instructions, 185 variations
Execution time Basic instructions
0.64
µ
s (LD instruction)
Special
instructions
7.8
µ
s (MOV instruction)
Program capacity
4,096 words
Max. I/O
capacity
CPU Board only
32 points/40 points
With Expansion I/
O Boards
168 points max.
Input bits
IR 00000 to IR 00915 (Words not used for input bits can be used for work bits.)
Output bits
IR 01000 to IR 01915 (Words not used for output bits can be used for work bits.)
Work bits
928 bits: IR 02000 to IR 04915 and IR 20000 to IR 22715
Special bits (SR Area)
448 bits: SR 22800 to SR 25515
Temporary bits (TR Area)
8 bits (TR0 to TR7)
Holding bits (HR Area)
320 bits: HR 0000 to HR 1915 (Words HR 00 to HR 19)
Auxiliary bits (AR Area)
384 bits: AR 0000 to AR 2315 (Words AR 00 to AR 23)
Link bits (LR Area)
256 bits: LR 0000 to LR 1515 (Words LR 00 to LR 15)
Timers/Counters
256 timers/counters (TIM/CNT 000 to TIM/CNT 255)
1-ms timers: TMHH(––)
10-ms timers: TIMH(15)
100-ms timers: TIM
1-s/10-s timers: TIML(––)
Decrementing counters: CNT
Reversible counters: CNTR(12)
Data mem-
ory
Read/Write
2,048 words (DM 0000 to DM 2047) The Error Log is contained in DM 2000 to
DM 2021.
Read-only
456 words (DM 6144 to DM 6599)
PLC Setup
56 words (DM 6600 to DM 6655)
Interrupt pro-
cessing
External interrupts
4 (Also used for external interrupt inputs in counter mode and quick-response
inputs.)
Interval timer inter-
rupts
1 (Scheduled Interrupt Mode or Single Interrupt Mode)
High-speed
counter
High-speed counter
1 (20 kHz single-phase or 5 kHz two-phase (linear count method))
Counter interrupt
1 (set value comparison or set-value range comparison)
Interrupt Inputs
(Counter mode)
4 inputs (Also used for interrupt inputs and quick-response inputs.)
Counter interrupts
4 (Also used for the external interrupt inputs and quick-response inputs.)
Pulse output
2 points with no acceleration/deceleration, 10 Hz to 10 kHz each, and no direction
control.
1 point with trapezoidal acceleration/deceleration, 10 Hz to 10 kHz, and direction
control.
2 points with variable duty-ratio outputs.
(Pulse outputs can be used with transistor outputs only, they cannot be used with
relay outputs.)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Содержание SYSMAC CPM2B
Страница 4: ...iv Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Страница 6: ...vi Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Страница 216: ...198 Index Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...