Omron SYSMAC C200HW-PCS01-EV1, Руководство по эксплуатации

Страница: 212 / 261

196
Response Block
14 27
Command
code Response
code
Results Storage Format
Response
code
Parameters TCP Socket Number (Command): Specify the TCP socket number to be
opened as two bytes between 1 and 4.
Results Storage Area (Command): The words 0 to 255 and 256 to 511 of the
memory area, words 0 to 6143 of the data memory, and words 0 to 6143 (each
bank) of the expansion data memory can be used. However, do not designate
the special auxiliary area. Refer to 11-1-4 Memory Area Designations. When a
bank that does not have expansion data memory is designated, the Results
Storage Area Error Flag will turn ON.
Note Any other processing, such as sending or receiving data, being carried out when
this close command is executed will be forcibly ended and a code will be stored
in the results storage area to indicate that this processing was forcibly ended.
Wait for the close processing on the connected node side.
Response code Description
0000 Normal
1100 The TCP socket number is out of range.
1101 The memory area code for the results storage area is out of
range.
1103 Non-zero bit address is specified for the results storage area.
2201 The specified socket is opened as a UDP socket.
2210 No connection could be established to the specified socket.
Response code Description
0000 Normal
Response Codes
Results Storage Area
Response Codes
FINS Commands Requesting Socket Services
Section 11-3