Omron SYSMAC C200HW-PCS01-EV1, Руководство по эксплуатации

Страница: 107 / 261

91
1, 2, 3... 1. Select “4. Edit HOSTS File.” from the main menu.
.
.
Select Number for ITEM (1–9): 4
Current HOSTS File Name: hosts.fil
New HOSTS File Name:
2. If a HOSTS file is to be initially created, press ENTER. If a HOSTS file with
another name already exists, enter the file name.
New HOSTS File Name:
: hosts May I setup current data? (Y/N)
3. Check that the file name is correct. Then, enter Y and press ENTER. The file
edit screen is displayed as shown below. To cancel the setting, enter N and
press ENTER to return to the main menu.
(0)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Enter Number of Line To Change (0–9), Add Line (10), Delete Line (0–9),
Display Previous Item (11), Display Next Item (12), End (13):
Specifying a new HOSTS file displays the file edit screen in which nothing is cur-
rently registered, as shown above.
4. Select 0.
Enter Number of Line To Change (0–9), Add Line (10), Delete Line (0–9),
Display Previous Item (11), Display Next Item (12), End (13): 0
Enter New Address and Name:
5. Specify the IP address and host name of the remote node. To do so, enter
the IP address, a space, and the host name in this order.
Enter New Address and Name: 123.45.67.89 myaddress
(0) 123.45.67.89 myaddress
(1)
(2)
.
.
(9)
Enter Number of Line To Change (0–9), Add Line (10), Delete Line (0–9),
Display Previous Item (11), Display Next Item (12), End (13):
Setup Software Operation
Section 7-6