Omron SYSMAC C200HW-PCS01-EV1, Руководство по эксплуатации

Страница: 242 / 261

Appendix J
Remote Tool Connection Procedure
226
Settings for Peripheral Bus
Use the SYSMAC Support Software to make the settings as shown in the following procedure.
1, 2, 3... 1. Select “C:PC interface” from the System Setup Menu.
2. Select “L:Peripheral Bus (via SYSMAC LINK).”
3. Select “K:Level” or “B:Baud rate.”
[ Level ]
0: Level #0
1: Level #1
[ Baud rate ]
A: 19,200
B: 9,600
C: 4,800
“Level” is the system of the PC Card Unit connected to the C200HX/HG/HE.
Settings for Host Link
Use the SYSMAC Support Software to make the settings as shown in the following procedure.
Note When communicating from a C200HX/HG/HE Communications Board, make sure that the SYSMAC LINK
Peripheral Device Initialization Bit (AR 2403) is turned ON when the SYSMAC Support Software connec-
tion port is changed.
1, 2, 3... 1. Select “C:PC interface” from the System Setup Menu.
2. Select “C:Host Link (via SYSMAC LINK).”
3. Set the level, baud rate, number of data bits, the host link unit number, parity, and number of stop
bits as required.
[ Level ]
0: Level #0
1: Level #1
[ Baud rate ]
A: 19,200
B: 9,600
C: 4,800
D: 2,400
[ Data bit ]
7: 7 bits
8: 8 bits
[ Unit No. ]
00 unit
(00 to 31)
[ Stop bits ]
1: 1 bit
2: 2 bits
[ Parity ]
E: Even parity
O: Odd parity
N: No parity
Note This procedure cannot be used with the base-mounted C200H-LK201-(V1) Host Link Unit.