Omron SYSMAC C200HW-PCS01-EV1, Руководство по эксплуатации

Страница: 47 / 261

31
4-3-3 Setting the Startup Mode
Pins 6 and 5 are used to set the startup mode. The setting procedure and pin
settings are described below.
Note Restart the PC Card Unit to use the new system switch settings. By default, all
pins are set to OFF. Change the switch settings as necessary.
Pin 6
Pin 5
Pin 6 and pin 5 settings Description
OFF
OFF
Normal mode (pins 2, 3, and 4 must be turned OFF.)
OFF
ON
File transfer mode
This mode is used to transfer the settings with the
Ethernet setup software.
ON
OFF
Memory card formatting mode
The FMT indicator flashes. This mode is used to format
the card inserted in the PC card slot. SRAM, ATA, and
FLASH cards can be inserted in the slot.
4-3-4 Setting the Card Format and Slot
Pins 4 and 3 are used to set the card format and the slot to be formatted. The
setting procedure and pin settings are described below.
Note Restart the PC Card Unit to use the new system switch settings. By default, all
pins are set to OFF. Change the switch settings as necessary.
Pin 4
Pin 3
Startup Mode Settings
(Pins 6 and 5)
Setting the System Switch
Section 4-3