Omron SYSMAC C200HW-PCS01-EV1, Руководство по эксплуатации

Страница: 105 / 261

89
Exiting the Setup Software Select “9. Exit” from the main menu.
1. Enter IP address for UNIT.
2. Enter Subnet address for UNIT.
3. Enter ODI Driver Path.
4. Edit HOSTS File.
5. Edit Conversion Table for IP address and FINS Node address.
6. Edit Routing Table for FINS.
7. Edit Gateway address for UNIT.
8. Transfer Setup Data From Computer to UNIT.
9. Exit.
Select Number for Item (1–9): 9
The setup software terminates and the DOS prompt is displayed.
7-6-3 IP Address
Specify the IP address of the PC Card Unit as described below.
1, 2, 3... 1. Select “1. Enter IP address for UNIT” from the main menu.
.
.
Select Number for ITEM (1–9): 1
Current IP address: 255.255.255.255
New IP address:
2. Specify the IP address of the PC Card Unit. Input a decimal number.
New IP address: 123.45.67.89
: 123.45.67.89 May I setup current data? (Y/N)
3. Make sure that the IP address is correct. Then, enter Y and press ENTER.
The screen will return to the main menu. To cancel the setting, enter N and
press ENTER to return to the main menu.
Note When the IP address of the PC Card Unit has been changed, always select “4.
Edit HOSTS File.” and set the HOSTS file.
7-6-4 Subnet Mask
Specify the subnet mask of the PC Card Unit as described below.
1, 2, 3... 1. Select “2. Enter Subnet address for UNIT” from the main menu.
.
.
Select Number for ITEM (1–9): 2
Current Subnet Mask: 255.255.0.0
New Subnet Mask:
2. Specify the subnet mask of the PC Card Unit. Input a decimal number.
New Subnet Mask: 255.255.255.0
: 255.255.255.0 May I setup current data? (Y/N)
Setup Software Operation
Section 7-6