Omron NS-CXDC1-V3, Руководство пользователя

Страница: 15 / 115

xv
From CX-Designer Version 3.0 to Version 3.007
Screen transfers Previously, when uploading project data
from the PT, the user display on the PT
would change to the transfer screen. Also,
after transfer finished, it was necessary to
reset the PT. When uploading project data, it is no longer
necessary to change to the transfer screen
while uploading, nor is it necessary to reset
the PT when the transfer has finished. Now,
the user can continue operating the PT
screens even while uploading.
Multivendor support --- The PT can now be connected to the fol-
lowing devices.
• Rockwell Automation (Allen-Bradley)
SLC500 Controller, MicroLogix, PLC-5,
CompactLogix, and ControlLogix
• Modbus RTU-compatible devices
Screen saver --- The time until the screen saver starts can
be indirectly specified.
String table support for alarms
and events --- Alarm and event message text strings can
now be viewed from string tables.
Disable function for screen
inputs --- It is now possible to enabled or disable
inputs and outputs to the entire screen
when a specified communications address
is turned ON or OFF.
Item Previous versions New version
CX-Designer Version 3.0 Version 3.007
NS system software Version 8.0 Version 8.1
Printer --- PictBridge-compatible printers are now
supported (except they are not supported
by the NS5-
@@
0
@
, NSJ5-
@@
0
@
, and
NSH5).
Multivendor support --- The following PLCs can now be connected
to an NS-series PT.
• Yokogawa Electric FA-M3-series and FA-
M3R-series PLCs.
Ladder Monitor --- • CJ2-series PLCs are now supported.
• The host connected to an NS-series PT
over an EtherNet/IP network can now be
monitored.
It is now possible to display a dialog box
asking for a password if data will be modi-
fied, such as when changing present val-
ues.
Data log graphs A line appeared on the data log graph while
data was being logged and then blank
spaces occurred at times when no data
was logged. A setting has been added to provide an
option to compress the times when data
was not logged so those times will not be
displayed. This way only logged data will be
displayed as one continuous line.
No data logged. Display showing compressed time when no
data was logged.
Item Previous versions New version
A
B
Logging was stopped.
Periods when logging
was stopped are dis-
played on a reduced
time scale.
A
B