Omron MicroHAWK V320-F, Руководство по подключению

Страница: 14 / 56

6. EtherNet/IP Settings
13
*1. The original data type is defined as "SINT". In this document, it is defined as "BYTE" that can be
displayed in “ASCII” for readability when monitoring with the Watch Tab Page of Sysmac Studio.
■ Definition of Status Signal area access data types (struct ure)
Data types for accessing the Status Signal area.
Note
Please refer to Appendices A-2 EtherNet/IP Specifications in the Autofocus Multicode
Reader MicroHAWK V320-F/V330-F/V420-F/V430-F Series User Manual for Communication
Settings
(Cat. No. Z407) for a description of how to use each bit.
Name of data type Data type Code reader data
S_EIPInput103 STRUCT
---
INFO_BITS BYTE INFO BIT
RESERVED1 BYTE Reserved for future use
RESERVED2 BYTE
Reserved for future use
RESERVED 3 BYTE Reserved for future use
DEVICE_STATUS Device_Status Status Signal (32 bits)
FAULT CODE DINT Error code
COUNTERS ARRAY[0..5]
OF DINT
Read Count Information
READ_CYCLE_
REPORT ARRAY[0..3]
OF INT
Read Cycle Report
DECODE_CYCLE_
REPORT ARRAY[0..3]
OF DINT
Decode Cycle Report
CODE_TYPE DINT Read Symbol Type
PIXELS_PER_
ELEMENT REAL
Read Symbol PPE Size
DECODE_LENGTH DINT Decoded String Length
DECODE_DATA ARRAY[0..435]
OF BYTE
*1
Decoded String
Name of data type Data type Code reader data
Device_Status ARRAY[0.31]
OF BOOL
---
Run_Mode BOOL Run Mode
Trigger_Acknowledge BOOL Accept trigger
Exposure_Done BOOL Exposure Done
Omitted
Output3_Status BOOL Output3 Status
Buffer_Overflow
BOOL
Buffer Overflow
Reserved ARRAY
[0..9] OF
BOOL Reserved for future use