Omron MicroHAWK V320-F Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 56

background image

3. Restrictions and Precautions

5

3. Restrictions and Precautions

(1) Before building a system, understand the specifications of devices which are used in the

system. Allow some margin for ratings and performance, and provide safety measures
such as installing a safety circuit in order to minimize the risk in case of failure.

(2) To ensure system safety, make sure to read and follow the information provided in all

Safety Precautions and Precautions for Safe Use in the manuals for each device which is
used in the system.

(3) The user is encouraged to confirm the standards and regulations that the system must

conform to.

(4) It is prohibited to copy, to reproduce, and to distribute a part or the whole of this

document without the permission of OMRON Corporation.

(5) The information contained in this document is current as of July 2022.

It is subject to change for improvement without notice.

The following notations are used in this document.

Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury, or may result

in serious injury or death. Additionally, there may be severe

property damage.

Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury, or property

damage.

Precautions for Correct Use

Precautions on what to do and what not to do to ensure proper operation and performance.

Note

Additional information to read as required.
This information is provided to increase understanding or make operation easier.

Symbols

The filled circle symbol indicates operations that
you must do.
The specific operation is shown in the circle and
explained in text.
This example shows a general precaution for
something that you must do.

«
...
4
5
6
7
8
...
»

Содержание MicroHAWK V320-F

























































Отзывы:

Нет отзывов

Похожие инструкции для MicroHAWK V320-F

Бренд: Intermec Страницы: 2

Бренд: EVROMEDIA Страницы: 64

PHOTO RESEARCH TRU 8

Бренд: Jadak Страницы: 9

Бренд: Climax Technology Страницы: 4

Бренд: AMX Страницы: 2

Monarch Pathfinder Ultra Platinum 6039

Бренд: Avery Dennison Страницы: 12

Бренд: Billow Страницы: 98

Бренд: Infinite Peripherals Страницы: 28

Бренд: Infinite Peripherals Страницы: 4

Бренд: aqprox! Страницы: 8

Бренд: The Future was 8 bit Страницы: 4

Бренд: Invengo Страницы: 36

Бренд: RealTrace Страницы: 56

SafeQ Ethernet Reader

Бренд: Ysoft Страницы: 17

Бренд: RIOTEC Страницы: 5

Бренд: G4S Страницы: 2

Бренд: G4S Страницы: 2

SAVEO-SCAN-R11D-BH

Бренд: Saveo Scan Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды