Omron MicroHAWK V320-F, Руководство по подключению, Страница: 13 / 56

6. EtherNet/IP Settings
12
6.2. Data Types to Use for Tag Data Links
This section describes an example of using data types for the code reader’s tag data link data.
<Input and Output Assemblies>
• Input Assembly: 1 Decode Input Assembly (103)
• Output Assembly: Output Assembly (197)
6.2.1. Output Area
The Output Area is an area where you can send commands to the code reader, such as
trigger input commands and commands for registering Match strings.
■ Definition of Output Area access data types (structure)
Data types for accessing the Output Area.
Name of data type Data type Code reader data
S_EIPOutput197 STRUCT
---
COMMANDS COMMAND Control signal (32 bits)
■ Definition of control signal area access data types (structure)
Data types for accessing the control signal area.
6.2.2. Input Area
The Input Area is an area where you can check the control status and output character strings
of the code reader, such as Accept Trigger confirmation and Read OK/NG results.
■ Definition of Input Area access data types (structure)
Data types for accessing the Input Area.
Name of data type Data type Code reader data
COMMAND ARRAY[0..3
1] OF BOOL ---
Run_Mode BOOL Run Mode
Trigger BOOL Trigger
Enable_MatchCode BOOL Enable MatchCode
Omitted
Output_2 BOOL Output 2
Output_3 BOOL Output 3
Reserved ARRAY[0..1
7] OF BOOL Reserved for future use