Omron FQ2-S/CH Series, Руководство пользователя, Страница: 472 / 590

Menu Tables
470
FQ2-S/CH User’s Manual
Sensor
set
tings
Da
ta out
put
No-
p
rotocol dat
a When the com-
munications type
is RS-232C no-
protocol
Baud rate
Set the baud rate to use for RS-232C
communications. 2400, 4800, 9600, 19200,
38400, 57600, or 115200
(Default: 38400)
System ---*
1
Data
length Sets the data length. 7bit
8bit (Default: 8bit) System ---*
1
Parity Sets the parity.
None
Odd
Even (Default: None)
System ---*
1
Stop bit Sets the number of stop bits. 1bit
2bit (Default: 1bit) System ---*
1
Flow con-
trol Sets the controls for the flow of communi-
cations with the software. None
Xon/Xoff (Default: None) System ---*
1
Delimiter
Set the delimiter to add to the end of com-
mands and responses. CR
LF
CR+LF (Default:CR)
System ---*
1
When
t
he
communi
ca
tio
ns t
ype
is RS-2
32C no-p
rot
ocol
Interval
timeout
(text) Timeout [s] Set the time in seconds to
generate a timeout error. 1 to 120 s, 0: Not monitored.
(Default: 0 s)
System ---*
1
Interval
time-
out(after
Xoff
reception)
Timeout [s] Set the time in seconds to
generate a timeout error. 1 to 120 s, 0: Not monitored.
(Default: 0 s)
System ---*
1
Link dat
a
outp
ut Communication
type
Sets the communications type to use for
EtherNet/IP outputs. Invalid (Default)
PLC link (SYSMAC)
PLC link (MELSEC) System ---*
1
Area set-
tings(Only when
communications
type is PLC Link)
---*
1
Co
m
m
an
d
Area
t
ype
Sets the area to write command data to
the Sensor.
Control inputs, command codes, and com-
mand parameters are written to this area. PLC Link (SYSMAC CS/CJ/CP/One)
CIO Area (CIO) (Default)
Work Area (WR)
Holding Bit Area (HR)
Auxiliary Bit Area (AR)
DM Area (DM)
EM Area (EM0 to EMC)
PLC Link (MELSEC QnU/Q/QnAS)
Data Register (Default)
File Register
Link Register
System
Ad
dress
Set the first address of the command area.
0 to 99,999 (Default: 0) System
Response
A
rea t
yp
e
Sets the area to write execution results
from the Sensor.
Control outputs, command codes,
response codes, and response data
PLC Link (SYSMAC CS/CJ/CP/One)
CIO Area (CIO) (Default), Work Area
(WR), Holding Bit Area (HR), Auxil-
iary Bit Area (AR), DM Area (DM),
EM Area (EM0 to EMC)
PLC Link (MELSEC QnU/Q/QnAS)
Data Register (Default)
File Register
Link Register
System
---*
1
A
ddress
Set the first address of the response area. 0 to 99999 (Default: 100)
System
Menu command Description Setting range Data